Who we are:
Jim Gervais, P.ENG. Professional Engineer, A.P.E.G.A.
Jim holds a mechanical engineering degree from Queen's University at Kingston and is a member of A.P.E.G.A (Association of Professional Engineers
and Geoscientists of Alberta). Jim has almost twenty year's experience in mechanical engineering consulting, manufacturing, quality systems and project
management.
For more information about APEGA click the link below:
Copyright © 2015 by "Defined Consulting Ltd" • All Rights reserved •
Copyright © 2015 by "Defined Consulting Ltd" • All Rights reserved •
Who we are:
Jim Gervais, P.ENG. Professional Engineer, A.P.E.G.A.
Jim holds a mechanical engineering degree from Queen's University at Kingston and is a member of A.P.E.G.A (Association of Professional Engineers and Geoscientists of Alberta). Jim has almost twenty year's experience in mechanical engineering consulting, manufacturing, quality systems and project management.
Frank Farkasdi, C.E.T. : Mechanical (HVAC), Certified Engineering Technologist with A.S.E.T.
Frank is a graduate of the Northern Alberta Institute of Technology (NAIT) in the HVAC program and is a Certified Engineering Technologist with A.S.E.T. (Alberta Society of Engineering Technologists). Frank has extensive theoretical and practical knowledge from specialized training and experience in the controls and building automation industry, including M&E coordination and consulting on diverse variety of project scopes.
Curt Shank, C.E.T. : Mechanical (HVAC), Certified Engineering Technologist with A.S.E.T.
Curt is a graduate of the Northern Alberta Institute of Technology (NAIT) in the HVAC program and is a Certified Engineering Technologist with A.S.E.T. (Alberta Society of Engineering Technologists). Curt has extensive theoretical and practical knowledge from several years of experience in the controls and building automation industry, as well as certification in Geo-thermal technologies.
For more information about APEGA & ASET, click the links below:
Jim Gervais, P.ENG. Professional Engineer, A.P.E.G.A.
Jim holds a mechanical engineering degree from Queen's University at Kingston and is a member of A.P.E.G.A (Association of Professional Engineers and Geoscientists of Alberta). Jim has almost twenty year's experience in mechanical engineering consulting, manufacturing, quality systems and project management.
Frank Farkasdi, C.E.T. : Mechanical (HVAC), Certified Engineering Technologist with A.S.E.T.
Frank is a graduate of the Northern Alberta Institute of Technology (NAIT) in the HVAC program and is a Certified Engineering Technologist with A.S.E.T. (Alberta Society of Engineering Technologists). Frank has extensive theoretical and practical knowledge from specialized training and experience in the controls and building automation industry, including M&E coordination and consulting on diverse variety of project scopes.
Curt Shank, C.E.T. : Mechanical (HVAC), Certified Engineering Technologist with A.S.E.T.
Curt is a graduate of the Northern Alberta Institute of Technology (NAIT) in the HVAC program and is a Certified Engineering Technologist with A.S.E.T. (Alberta Society of Engineering Technologists). Curt has extensive theoretical and practical knowledge from several years of experience in the controls and building automation industry, as well as certification in Geo-thermal technologies.
For more information about APEGA & ASET, click the links below:
Copyright © 2015 by "Defined Consulting Ltd" • All Rights reserved •
Copyright © 2015 by "Defined Consulting Ltd" • All Rights reserved •
What we offer :
Defined Consulting Ltd, including its directors, associates, and affiliates bring extensive experience in areas of
project and building design. Our directors offer over 30 years of commercial and industrial engineering, design,
and project experience. As a team, we are well versed in design, management, project coordination, and
commissioning. Our mission is to provide the optimum building designs following ASHRAE guidelines while
maintaining fiscal responsibility and budget requirements.
Our expertise is available in several disciplines, including;
•Design of HVAC mechanical systems that allow for optimize energy savings while promoting healthy building
environments.
•Design of industrial and commercial air and hydronic systems.
•Plumbing system design.
•Existing building assessments, retrofits, tenant fit-out designs, modernization, and building system upgrades.
•Building control systems design.
•Mechanical / Electrical Project Coordination (M&E).
•Building systems commissioning.
•Equipment (mechanical) surveys.
•Project Management.
•Product Design.
•Building technology integration design and consulting.
Copyright © 2015 by "Defined Consulting Ltd" • All Rights reserved •
Who we are:
Jim Gervais, P.ENG. Professional Engineer, A.P.E.G.A.
Jim holds a mechanical engineering degree from Queen's University at Kingston and is a member of A.P.E.G.A
(Association of Professional Engineers and Geoscientists of Alberta). Jim has almost twenty year's experience
in mechanical engineering consulting, manufacturing, quality systems and project management.
Frank Farkasdi, C.E.T. : Mechanical (HVAC), Certified Engineering Technologist with A.S.E.T.
Frank is a graduate of the Northern Alberta Institute of Technology (NAIT) in the HVAC program and is a
Certified Engineering Technologist with A.S.E.T. (Alberta Society of Engineering Technologists). Frank has
extensive theoretical and practical knowledge from specialized training and experience in the controls and
building automation industry, including M&E coordination and consulting on diverse variety of project scopes.
Curt Shank, C.E.T. : Mechanical (HVAC), Certified Engineering Technologist with A.S.E.T.
Curt is a graduate of the Northern Alberta Institute of Technology (NAIT) in the HVAC program and is a
Certified Engineering Technologist with A.S.E.T. (Alberta Society of Engineering Technologists). Curt has
extensive theoretical and practical knowledge from several years of experience in the controls and building
automation industry, as well as certification in Geo-thermal technologies.
For more information about APEGA & ASET, click the links below:
Who we are:
Jim Gervais, P.ENG. Professional Engineer, A.P.E.G.A.
Jim holds a mechanical engineering degree from Queen's University at Kingston and
is a member of A.P.E.G.A (Association of Professional Engineers and Geoscientists
of Alberta). Jim has almost twenty year's experience in mechanical engineering
consulting, manufacturing, quality systems and project management.
Frank Farkasdi, C.E.T. : Mechanical (HVAC), Certified Engineering Technologist
with A.S.E.T.
Frank is a graduate of the Northern Alberta Institute of Technology (NAIT) in the
HVAC program and is a Certified Engineering Technologist with A.S.E.T. (Alberta
Society of Engineering Technologists). Frank has extensive theoretical and practical
knowledge from specialized training and experience in the controls and building
automation industry, including M&E coordination and consulting on diverse variety of
project scopes.
Curt Shank, C.E.T. : Mechanical (HVAC), Certified Engineering Technologist with
A.S.E.T.
Curt is a graduate of the Northern Alberta Institute of Technology (NAIT) in the HVAC
program and is a Certified Engineering Technologist with A.S.E.T. (Alberta Society of
Engineering Technologists). Curt has extensive theoretical and practical knowledge
from several years of experience in the controls and building automation industry, as
well as certification in Geo-thermal technologies.
For more information about APEGA & ASET, click the links below:
.
Copyright © 2015 by "Defined Consulting Ltd" • All Rights reserved •
Who we are:
Jim Gervais, P.ENG. Professional Engineer, A.P.E.G.A.
Jim holds a mechanical engineering degree from Queen's University at Kingston and is a member of A.P.E.G.A (Association of Professional Engineers and Geoscientists of Alberta). Jim has almost twenty year's experience in mechanical engineering consulting, manufacturing, quality systems and project management.
For more information about APEGA click the link below:
Jim Gervais, P.ENG. Professional Engineer, A.P.E.G.A.
Jim holds a mechanical engineering degree from Queen's University at Kingston and is a member of A.P.E.G.A (Association of Professional Engineers and Geoscientists of Alberta). Jim has almost twenty year's experience in mechanical engineering consulting, manufacturing, quality systems and project management.
For more information about APEGA click the link below: